DFCCIL Je Civil Previous Years Questions Paper’s Nichod Quiz – 10

1.The maximum distance between the centres of two adjacent Bolt in a line laying in the direction of stress for a tension member of 12 mm thickness isA. 300 mmB. 16tC. 192 mmD. 144 mmAnswer :- The distance between the centre of two adjacent pitch in a line laying in the direction of stress should not exceed 16t or 200 mm whichever is less.So 16 × 12 = 192 mm. 2.The sedimentation analysis for particles size distribution is adopted for the soil particles that are finer thanA. 75 micronB. 425 micronC. 625 micronD. 75 mmAnswer :-1.The sedimentation analysis for particles

The post DFCCIL Je Civil Previous Years Questions Paper’s Nichod Quiz – 10 appeared first on Exam Guru g.



from WordPress https://ift.tt/34wGV07
via IFTTT

Comments

Post a Comment

Popular posts from this blog

Civil Engineering || HPGK || Previous Years Questions

  1.A type of door used to supplement the natural lighting provided by window is known as___________. A. ledged door B. panelled door C. glazed door D. braced door Correct Answer: Option 3  1.Glazed Door: – This type of door is made with glass panels and can be fabricated to a particular shape and pattern. It is used to supplement the natural lighting provided by the window Use: Inside the house where there is an architectural and aesthetic requirement. 2.Braced Door: – Braced doors are wooden strong and sturdy doors made of at least three horizontal and one diagonal rail on the rear side of the door. Use: In barns, garages, and sheds, etc. 3.Frame and panel: – Consists of a framework of vertical members called styles and horizontal members called rails. The panel is made from timber, plywood, and blockboard. Use: Almost used in all type of buildings. 2.Concrete corridor is made if daily traffic is not more than ? A. 500 ton B. 750 ton C. 1000 ton D. 1250 ton...
Read more

All india level Je/AE Questions Quiz- 6

1.The percentage of earnest money isA. 1%B. 2%C. 5%D. 10%Answer :- While submitting a tender the contractor is to deposit a certain amount, approximately about 2% of the estimated cost with the department as the guarantee of the tender is called as earnest money. 2.The percentage of security money is aboutA. 2%B. 5%C. 10%D. 15%Answer :- If the contractor accepted the tender , then he has to deposit 10% of tendered amount as security money with the department which is inclusive of the earnest money already deposited. 3.The unit of measurement of supply of coal isA. Cubic metresB. Sq m.C. The post All india level Je/AE Questions Quiz- 6 appeared first on Exam Guru g . from WordPress https://ift.tt/344Frd2 via IFTTT
Read more