HP JE Civil Engineering Previous Year Questions

 1.The 90° bend allowance according to IS 2502-1963 for 6 mm diameter mild steel bar is

A. 30 mm

B. 36 mm

C. 54 mm

D. 75 mm

Correct Answer: Option 4 (Solution Below)

2.The extra length required for two semi-circular hooks of a reinforcement bar is

A. 18d

B. 10d

C. 9d

D. 0.42d

Correct Answer: Option 3 (Solution Below)

3.As per IS 456-2000, deformed bars may be used without end anchorage provided

A. Minimum spacing between the adjacent rod is ensured

B. Sufficient cover is provided to the reinforcement bars

C. Development length required is satisfied

D. None of the above

Correct Answer: Option 3 (Solution Below)

4. In an RCC beam compression failure occurs in a/an

A. balanced section

B. over reinforced section

C. under reinforced section

D. None of the above

Correct Answer: Option 2 (Solution Below)

5.Doubly reinforcement is provided in beam:

A. To reduce deflection of beam only

B. To reduce torsional moment only

C. When depth of the section is restricted only

D. All of the above

Correct Answer: Option 4 (Solution Below)

6.The slope of a bending moment diagram gives ______.

A. Tensile force

B. Shear force

C. Compressive force

D. Couple

Correct Answer: Option 2 (Solution Below)

7.What is the unit of the Section modulus?

A. mm4

B. mm

C. mm2

D. mm3

Correct Answer: Option 4 (Solution Below)

8. _____ is the algebraic sum of the moments of the forces on either side of the section of a loaded beam.

A. Retaining walls

B. Modulus of Resilience

C. Shearing force

D. Bending moment

Correct Answer: Option 4 (Solution Below)

9. EEPROM stands for :

A. Electrical Erasable Programmable Read Of Memory 

B. Erasable Electrically Programmable Read Only Memory

C. Easily Erasable Programmable Read Only Memory

D. Electrically Erasable Programmable Read Only Memory

Correct Answer: Option 4 (Solution Below)

10. Bernoulli’s Equation is obtained by

A. Integration of Euler’s Equation

B. Differentiation of Euler’s Equation

C. Double differentiation of Euler’s Equation

D. Newton’s law of motion

Correct Answer: Option 1 (Solution Below)

11. The momentum correction factor (β) is used to account for:

A. Change in direction of flow

B. Change in total energy

C. Non-uniform distribution of velocities at inlet and outlet sections

D. Change in mass rate of flow

Correct Answer: Option 3 (Solution Below)

12. Bernoulli’s theorem for liquid is applicable for which of the following?

A. Viscous fluids

B. Incompressible fluids

C. Compressible fluids

D. Turbulent flow

Correct Answer: Option 2 (Solution Below)

13. For the growth of plants, the useful soil moisture is

A. rainwater

B. capillary water

C. gravity water

D. chemically treated water

Correct Answer: Option 2 (Solution Below)

14. Acidic soils are reclaimed by:

A. Leaching of the soil

B. Using limestone as a soil amendment

C. Using gypsum as a soil amendment

D. Provision of drainage

Correct Answer: Option 2 (Solution Below)

15.Which of the following represents the correct sequence of plasticity of minerals in soil in an increasing order?

A. Kaolinite, silica, mantorillonite, illite

B. Kaolinite, silica, illite, montmorillonite

C. Silica, kaolinite, illite, montmorillonite

D. Silica, kaolinite, montmorillonite, illite

Correct Answer: Option 3 (Solution Below)

16.The clay mineral, whose structural units are held together by potassium bond is

A. Halloysite 

B. Illite

C. Kaolinite

D. Smectite

Correct Answer: Option 2 (Solution Below)

17. The actual velocity of water flowing through the voids called as

A. Seepage velocity

B. Infiltration velocity

C. Flow velocity

D. Void velocity

Correct Answer: Option 1 (Solution Below)

18.For which of the following types of sand is the angle of internal fraction maximum?

A. Angular-grained dense sand

B. Angular-grained loose and

C. Round-grained loose sand

D. Round-grained dense sand

Correct Answer: Option 1 (Solution Below)

The post HP JE Civil Engineering Previous Year Questions appeared first on .



from WordPress https://ift.tt/3bqMkcJ
via IFTTT

Comments

Post a Comment

Popular posts from this blog

Civil Engineering || HPGK || Previous Years Questions

  1.A type of door used to supplement the natural lighting provided by window is known as___________. A. ledged door B. panelled door C. glazed door D. braced door Correct Answer: Option 3  1.Glazed Door: – This type of door is made with glass panels and can be fabricated to a particular shape and pattern. It is used to supplement the natural lighting provided by the window Use: Inside the house where there is an architectural and aesthetic requirement. 2.Braced Door: – Braced doors are wooden strong and sturdy doors made of at least three horizontal and one diagonal rail on the rear side of the door. Use: In barns, garages, and sheds, etc. 3.Frame and panel: – Consists of a framework of vertical members called styles and horizontal members called rails. The panel is made from timber, plywood, and blockboard. Use: Almost used in all type of buildings. 2.Concrete corridor is made if daily traffic is not more than ? A. 500 ton B. 750 ton C. 1000 ton D. 1250 ton...
Read more

All india level Je/AE Questions Quiz- 6

1.The percentage of earnest money isA. 1%B. 2%C. 5%D. 10%Answer :- While submitting a tender the contractor is to deposit a certain amount, approximately about 2% of the estimated cost with the department as the guarantee of the tender is called as earnest money. 2.The percentage of security money is aboutA. 2%B. 5%C. 10%D. 15%Answer :- If the contractor accepted the tender , then he has to deposit 10% of tendered amount as security money with the department which is inclusive of the earnest money already deposited. 3.The unit of measurement of supply of coal isA. Cubic metresB. Sq m.C. The post All india level Je/AE Questions Quiz- 6 appeared first on Exam Guru g . from WordPress https://ift.tt/344Frd2 via IFTTT
Read more